How to Install Your Point of Use UV Water Purifier

Woman looking under sink to install point of use purifier


What is a Point of Use Purifier?

A point of use UV water purifier installs directly at the site of use — for example, under a kitchen or bathroom sink. It provides treatment only to the water coming from that treated location. When choosing the best place to install your point of use UV Water Purifier, there are several things to consider. The correct installation will enable easy use and maintenance while ensuring proper purifier operation. Follow the 5 tips below.

1. Install the UV Water Purifier as Close to Point of Use as Possible

Installation diagram for point of use UV water purifier

The UV water purifier should always be installed closest to the point of use, after any deionizers, water softeners, carbon / sediment filters, pressure tanks, pumps, and reverse osmosis systems. This practice reduces the chance of the purified water being re-contaminated by microorganisms in the water distribution system after the water purifier.

2. Mount the Purifier on a Level Surface

Level placed on a flat, dry surface under sink

A point of use water purifier should install horizontally on a flat, dry surface. The purifier should not be solely supported by its plumbing connections. Mount the water purifier using mounting clips, brackets, or a stand.

3. Install a Drain Pan for Added Protection Against Leaks

UV water purifier with drain pan underneath

As with any water handling device, the water purifier should be located in an area where any possible condensation or leakage from the water purifier, any purifier accessory, and/or plumbing will not damage the surrounding area. For added protection, it is recommended that you install a drain pan under the point of use purifier. The drain pan must be plumbed to an adequate, free flowing drain to prevent water damage in the event of a leak.

4. Install Point of Use Water Purifier with Room for Lamp and Filter Change

Space needed to change lamp and filter

The water purifier should be installed in a dry, well-lit area which provides enough room to perform routine maintenance. This includes a minimum distance of one chamber length from the chamber end, to allow for cleaning and/or the changing of the lamp and quartz sleeve, as well as a minimum of 6” on the opposite end of the water purifier. Minimum clearance to the floor is 18’’.

5. The Ideal Point of Use Purifier Installation will be Easy

Finished installation of point of use water purifier

Following these tips will help you achieve the best possible outcome for a point of use purifier install. Remember to follow the full, detailed instructions in the owner’s manual for more information. When all plumbing connections are complete, follow the manual to ensure proper operation of the water purifier. Read our FAQ blog post to learn how UV water purifiers work.

Learn More & Shop UV Water Disinfection

Atlantic Ultraviolet Corporation’s water purifiers are constructed from stainless steel and the highest quality materials, using UV-C lamps to neutralize harmful microorganisms. There are several product lines and various models designed for residential, commercial, and industrial use. Available accessories provide flexibility for virtually any application.

Shop at AtlanticUltraviolet.com

Contact Us

Atlantic Ultraviolet Corporation logo, 60 years seal, and building

CM-000206