Sanitron Ultraviolet Water Purifier Lamp Removal and Replacement

Last Updated on May 27, 2020

This instructional video demonstrates the Ultraviolet Water Purifier lamp removal and replacement for the SANITRON^® , a UV water purifier by Atlantic Ultraviolet Corporation.

SANITRON^® Ultraviolet Water Purifier Lamp Removal

SAFETY EQUIPMENT REQUIRED TO PERFORM TASK

Step 1

WARNING: Disconnect power to the SANITRON^® Ultraviolet Water Purifier

Step 2

Remove EASY-OFF™ End Cap by pulling cap off static gland nut. Slide end cap along the wire away from the socket.

Step 3

Carefully withdraw lamp approximately 2 inches from chamber to reveal lamp socket.

Step 4

While holding lamp end, carefully remove lamp socket on now exposed end.

Step 5

Remove the other EASY-OFF™ End Cap by pulling cap off static gland nut. Slide end cap along the wire away from the socket.

Step 6

Carefully withdraw lamp approximately 2 inches from chamber to reveal lamp socket.

Step 7

While holding lamp end, carefully remove lamp socket.

Step 8

Lamp should now be disconnected on both ends. Carefully remove lamp from chamber. Be sure to withdraw lamp straight out without angling until completely clear of quartz sleeve. CAUTION: Lamp and quartz sleeve are easily damaged. Exercise care when handling