Germicidal Ultraviolet Lamps
Lamps, Ballasts, Quartz Sleeves, Parts and Accessories
STER-L-RAY® Instant Start Germicidal UV Lamps utilize a coil filament on each end which operates hot. Lamp life is governed by the life of the electrodes and is affected by the frequency of starting.
STER-L-RAY® Instant Start Germicidal UV Lamps are well suited to applications requiring high ultraviolet intensity such as water disinfection, air purification in duct systems and conveyorized product disinfection. Available in Low Ozone and Ozone Producing versions.
See Instant Start UV Lamp Chart
STER-L-RAY® Preheat Germicidal UV Lamps are operated by a preheat start circuit that employs a relatively compact and economical ballast. The preheat circuit requires four electrical connections per lamp and a slight to moderate delay is needed to start the lamp. Some modern electronic ballasts are capable of instant starting a Preheat lamp. Available in Low Ozone and Ozone Producing versions.
See Preheat UV Lamp Chart
STER-L-RAY® Cold Cathode Germicidal UV Lamps are instant starting and utilize a large cylindrical cathode instead of a tungsten filament. Due to this construction, the lamp is not adversely affected by frequent starting and the life is considerably in excess of other lamp types. Cold cathode germicidal UV lamps have favorable operating characteristics at reduced temperatures. They are, therefore, widely used in walk-in refrigerators and holding rooms.
STER-L-RAY® Cold Cathode Germicidal UV Lamps are well suited for disinfection of air and surfaces due to their long life and low depreciation. Cold Cathode germicidal uv lamps are also employed in applications where frequent starting is a requirement. Available in Low Ozone and Ozone Producing versions.
See Cold Cathode UV Lamp Chart
U-Shaped uv lamps are the ideal choice for applications that require more intense ultraviolet radiation in a limited space. STER-L-RAY® Instant Start and Cold Cathode UV Lamps are available in U-Shaped configuration in Low Ozone and Ozone Producing versions.
See U-Shaped UV Lamp Chart
STER-L-RAY® High Output (HO) Germicidal UV Lamps are similar in size and shape to conventional germicidal UV lamps but are capable of operating at higher UV output.
STER-L-RAY® HO Germicidal UV Lamps are widely used in forced air duct systems and water disinfection applications. High Output (HO) Ozone producing UV lamps are often found in odor control and photochemical applications. Available in Low Ozone and Ozone Producing versions.
See High Output UV Lamp Chart
STER-L-RAY® Enhanced Output Amalgam UV Lamps provide germicidal ultraviolet output three or more times than that of conventional germicidal UV lamps of similar length without sacrificing efficiency or lamp life.
STER-L-RAY® Enhanced Output Amalgam UV Lamps are the highest expression of ultraviolet lamp technology and as such are the subject of ongoing technical development and improvement. Custom and proprietary designs are available to satisfy specialized needs. Available in Low Ozone and Ozone Producing versions.
See Enhanced Output Amalgam UV Lamp Chart
STER-L-RAY® High Intensity Germicidal UV lamps are manufactured with a unique structure and large diameter quartz envelope which translates to more than twice the amount of ultraviolet output when compared to standard germicidal UV lamps of the same length. Available in Low Ozone and Ozone Producing versions.
See High Intensity Germicidal UV Lamp Chart
Other Lamp Types Include:
The ArmorLite™ Ultraviolet Lamp Safety Shield provides increased security for employees, products and work environments by eliminating the dangers associated with fragments of broken quartz and mercury contamination. ArmorLite™ protected lamps are available for use with any new or existing ultraviolet installation.
Atlantic Ultraviolet’s Surelite™ Electronic Ballasts have been extensively tested with STER-L-RAY® UV lamps and are strongly recommended to achieve the best performance and longest lamp life. A complete range of Surelite™ high efficiency electronic ballasts are available to provide superior and reliable performance of STER-L-RAY® ultraviolet lamps.
CRYSTAL CLEAR™ High Quality Quartz Sleeves are available in a wide range of diameters and wall thicknesses, and in virtually any length. Standard and custom configurations are available. Can be supplied with open ends or with closed (test tube) end. Fire polishing and custom fabrication are available upon request.
Steadfast™ Lampholders, Sockets and Wiring Devices are available for single pin and multi-pin lamps. Atlantic Ultraviolet maintains a complete inventory of lamp holders and sockets for all applications. To select the proper lampholder, contact one of our Ultraviolet Application Specialist to assist with your purchase.
Atlantic Ultraviolet Corporation offers a large variety of Optional Accessories for all of its ultraviolet air and surface disinfection equipment. Optional Accessories include the SENTINEL® Remote Lamp Indicator, ZENITH™ Ultraviolet Meter, ArmorLite™ Safety Shield, Filters, Mounting Legs and Kits, Integral Elapsed Time Indicator, Key Lock Switch, Face Gear, Wire Form Lamp Guards, Handles and Observation Port/Sight Glass Assembly and CRYSTAL CLEAR™ Quartz Sleeves can be added to some units.
Atlantic Ultraviolet Corporation offers a large variety of Monitoring Options and Optional Accessories for all of its ultraviolet water purification equipment. Monitoring options include the STERALERT™ Lamp Status Alarm, SENTRY™ Safety Sensor and GUARDIAN™ Ultraviolet Monitor. Optional Accessories include: Promate™ Audio Alarm, Elapsed Time Indicator, Solenoid Valves, Time Delay Mechanism, Flow Control Valves, Wall Mounting Kits, and the QUANTUM™ Thermal Optimizer.
Atlantic Ultraviolet Corporation have replacement parts for all their brands of equipment. Please refer to the Owner’s Manual supplied with your unit for the item number of the part you require or contact one of our Ultraviolet Application Specialist to assist with your purchase.
Need help? Call Our UV Specialists 1-631-273-0500, Monday-Friday 7am to 6pm EST or Contact Us